(+90) 216 541 93 34
PRODUCTS - Industrial Air Filtration Systems - Jet Pulse Cartridge Filter


General Features

Bomaksan branded PKF Jet-Pulse Dust Collector has a modular structural design. Thus when you need to increase your filter capacity, you can directly add a new PKF device to your system without replacing the old one.

Thanks to it’s high efficient automatic cleaning system designed by Bomaksan engineers as part of R&D project, while the consumption of compressed air is decreasing, the life  of filters increases.
Bomaksan branded PKF Jet-Pulse Dust Collector may be re-designed by Bomaksan engineers by considering your factories settlement plan and provides the most suitable solution.
Side and upper doors of cabin, makeup profile, chassis and carrying legs are produced with sufficient plate thickness and leak-proof is ensured by press injection unifying with a nut.
Thanks to it’s special design, Bomaksan branded PKF Jet-Pulse Dust Collector is shipped to your factory as ready to be setup and easily put to use.
Bomaksan branded PKF Jet-Pulse Dust Collector gives you the chance to change dust bin discharge and filter easily due to its ergonomic design.

BOMAKSAN branded PKF Jet-Pulse Cartridge Dust Collectors can be installed both as a central system or as stand alone collector placed right next to the pollutant source. Polluted air collected from any source will directed to the dust collector with well-designed ducts. Ducting in dust collection system must be sylindirical and self-flanged.

For further information, please check out the catalogue.



Powder Coating

Automotive Ceramic
Shot/Sand Blasting

Metal Working

Food & Beverages Pharmaceutical

Standard Accesories

Targeted to satisfy requested flow and pressure, centrifuge type, conforming the standards and with its’ direct drive motor its’ produced to work quite and vibration free. Fan motor are made by steel as standard and balanced dynamically and statically on specialized plants.
Pulse Valves & Air Tank
Pulse Valves are made by aluminum cast block and 1½’’ sized. They perform with 24V DC standard voltage. Air tank is produced conforming to compressed container technique and adequate to store the air between two valves.

Fan Control Panel
The panel containing thermal switch controlling ventilator engine, contactor, engine protection relay and working/warning lights.

Sequencer (with Differential Pressure)
It analyzes differential pressure occurs due to pollution of lters digitally and controls pulse valves. Covered with IP 65 class, made by ABS, water- and dust-proof case.
Diaphragm Valves
Aluminium casted diaphragm valves are used to make effective pulse-cleaning of cartridge filters. 1" or 1½" can be installed depending on the process and design.  
Dust Bin
It helps to empty the collected dust from cartridge filters. It has a sealing gasket and can be assembled and disassembled easily.


Optional Accesories

Pilot Box & Ex-Proof Coils
The box protects pulse valve coils from extreme outside conditions.
Explosion Vent
ATEX certificated explosion door is used, which is produced by stainless steel.
Rotary Valve
When the dust density of dirty air getting into the collector is high, rotary valve empties the dust continuously from the unit. It is made by cast block with an outer ball bearing, engine and reductor.
Produced cylindrically to absorb the air noise of fan outlet.
Compressed Air Regulator
It regulates the pressure of the compressed air coming from compressor and ensures it has been forwarded to air tank as dry, thus the filter cleaning pressure is kept under control and safety of filters is guaranteed

jet pulse cartridge filter

jet pulse filters

cartridge dust collectors

cartridge type dust collector

cartridge filtration system

pulse jet fabric filter

pulse jet dust collection

pulse jet dust collectors